24 Oct, 14

Citroen, Peugeot + Renault Common ABS Pump (ESP Fault) – Brake Pressure Sensor Switch Failure

ABS ESP "Brake Pressure Sensor" ProblemsCommon Citroen, Peugeot + Renault ESP Fault
The common ‘Brake Pressure Sensor’ fault has famously affected almost all Makes of vehicles including Citroen, Peugeot and Renault. On earlier models the brake pressure sensor was mounted externally on the ABS pump or near the brake master cylinder / brake servo. The external sensor was much more reliable but if the sensor did ever fail, a replacement could be purchased from dealers and parts factors at a very low cost. Newer ABS pumps (namely the ATE MK60 ABS Pump and later) are now being manufactured with the brake pressure sensor installed internally and it’s not a case of if, but when it fails – there is no option to buy and replace the sensor unit. Dealerships will require you to purchase a complete new ABS pump at a very high price.

How To Tell If You Have The “Brake Pressure Sensor” ESP Fault
If you have got the brake pressure sensor ESP fault with your car then you will notice that the ESP button will be illuminated or the ESP light will be lit on the dash and pressing the ESP button will have no affect. The ABS light may also be illuminated and when you have a diagnostic machine plugged into the vehicle, it will bring a fault code similar to below:

C1301 – Incoherence between the brake light switch and the pressure sensor
C1302 – Braking pressure sensor signal fault : Open circuit, short circuit to positive, short circuit to earth

When you have a Brake Pressure Sensor fault, you will be advised to replace the ABS pump and the expected cost of a new replacement unit will be £1200+. The new ABS pump will require programming after fitting which is an additional cost.

Below is a shot list of some of the most common Citroen, Peugeot + Renault vehicles we are taking calls for daily with the ESP fault.

Common VehiclesCommon VehiclesCommon VehiclesCommon Vehicles
Citroen C2Citroen C3Citroen C4Peugeot 1007
Peugeot 206Peugeot 207Renault Laguna IIAnd More..!

There are 100s of part numbers associated to the MK60 ATE unit fitted to these vehicles and below is a list of some of the most common part numbers we are seeing being sent in for repair or exchange:

Part NumbersPart NumbersPart Numbers
10.0206-0252.410.0960-1169.39661691380
10.0206-0253.410.0960-1170.39662150780
10.0206-0256.410.0960-1173.39662150480
10.0206-0315.410.0960-1184.39663703980
10.0206-0317.410.0960-1185.39662295780
10.0206-0328.400401635C29662295880
10.0206-0329.410.0960-1188.39663703280
10.0399-2976.410.0960-1195.39663703380
10.0206-0334.410.0960-1191.39664383580
10.0206-0383.410.0960-3920.39665345380
5139E096638415808200053423B
4542Z28200183452B8200053423C
8200345940C8200426953A8200001333B
8200426953B8200345940B8200001333C
966229558082008081459648606980
10.0206-0346.410.0206-0168.48200159837E
10.0206-0014.410.0206-0015.48200053422

The ABS pump will have failed due to a common known manufacturing defect and replacing it with a like for like new or used part may rectify the fault temporarily but you can expect it to fail again in the near future.

There is also the option of purchasing a standard rebuilt part or a repair kit as some parts factors are now offering. This is simply a repair to the existing part by replacing the sensor with a like-for-like part.. It is in no way a superseded part and will carry the same design fault.

Why You Should Choose Sinspeed To Replace / Remanufacture Your ABS Module
What we offer is very different. We remanufacture the ABS pump, bypass the internal pressure switch and fit our very own custom manufactured external brake pressure sensor and calibrate it to completely eliminate the possibility of a repeat failure. This is the only way to remove all risks of the unit failing again and this is why we are confident enough to offer our units with a LIFETIME warranty.

What’s more our units are now Self-Calibrating so even if you purchase an exchange part from us, the ABS unit we send to you will self-calibrate to your vehicle and will not require programming – Guaranteed!

SAFETY WARNING!!
There are rumours of people and/or companies trying to repair the ABS units and in some cases imitate our work by modifying them. Please understand that although the ESP system is not absolutely crucial, modifying the ABS controller/pump in any way (without superior extensive knowledge) in the technology of advanced braking systems and electronic control modules, you will be risking the life of others. Please do not attempt to repair these units yourself and please do not offer such services to trade or the general public. We have been in business since 1972 as a group company and all our parts & services are fully tested before leaving the workshop. All units are thoroughly tested on specific specialist equipment to ensure maximum quality. Our ESP Fault Modifications come fully approved and as far as we’re aware, there is no other company out there that can successfully repair these units and completely remove the defective state.

If you have a Citroen, Peugeot or Renault with an ABS fault, then email or call us today on 0203 815 9441 for an instant quote.

Tags : 10020600144, 10020600154, 10020601684, 10020602524, 10020602534, 10020602564, 10020603154, 10020603174, 10020603284, 10020603294, 10020603344, 10020603464, 10020603834, 10039929764, 10096011693, 10096011703, 10096011733, 10096011843, 10096011853, 10096011883, 10096011913, 10096011953, 10096039203, C1301 Brake Pressure Sensor Fix, C1302 Brake Pressure Sensor Fix.
60 thoughts on “Citroen, Peugeot + Renault Common ABS Pump (ESP Fault) – Brake Pressure Sensor Switch Failure
    • Hi Geoff

      Thanks for the enquiry,

      I have sent you an email with full information and pricing.

      Kind Regards

      Jason
      SINSPEED

  • Hello, how mutch it cost an abs/esp Unit for a citroen c2 1.6hdi 109hp. Thanks.

    • Hi Albert

      Thanks for the enquiry,

      I have sent you an email with full information and pricing.

      Kind Regards

      Jason
      SINSPEED

  • I have a pug 308 1.6 Sport diesel abs fault and esp fault code c1301 pressure sensor been quoted 550 for new pump from Peugeot can u beat that in any way???

    • Hi Adam

      Thanks for the enquiry,

      I have sent you an email with full information and pricing.

      Kind Regards

      Jason
      SINSPEED

  • Hi, I have a Renault Trafic van 2011 plate which has the ABS warning light permanently on. My Local garage has done their diagnostic tests and conclude that it is a mechanical fault rather than electrical. My ABS Modulator Unit is a Bosch model, No:0285 800 839 (085) 10 618 o0 701. Do you supply units off the shelf so my garage can swap the units or do I have to plan for down time to wait for the current unit to be sent to you for Refurbishment and return? Hamilton

    • Hi Hamilton

      Thanks for the enquiry,

      We do carry some units in stock but I’ve done a quick check and noticed some errors in the part numbers you have provided. I have sent you an email, kindly reply to the email with the correct part numbers and we can price it up accordingly if we have it available for you.

      Kind Regards

      Jason
      SINSPEED

  • Hi I’ve got peugeot 207cc gt 2008 with the dreaded abs sensor fault. I’m living in tenerife can you quote me for repair and return postage to the canary islands please, thanks.

    • Hi Simon

      Thanks for the enquiry,

      We have sent you an email with full information and pricing.

      Kind Regards

      Sophie
      SINSPEED

    • Hello Christer

      Thanks for getting in touch,

      We have sent you an email with more details about your query.

      Kind Regards

      Sophie
      SINSPEED

  • I have a 2014 Peugeot 308 T9 1.6 Diesel. It is showing ASP/ESR fault. When scanned it gives code C0040 brake Pedal sensor incoherence. I have replaced the combined brake light/ pedal sensor switch to no avail. The fault is still there. Can you suggest a solution, could it be an ABS pressure Fault?
    Regards,
    Gary ridler

    • Hello Gary

      Thanks for getting in touch,

      We have sent you an email with full details and pricing.

      Kind Regards

      Sophie
      SINSPEED

  • Hi, I have a Renault Espace 2.2 dci, year 2005. ESP light on, Service ESP on. I am a mechanic, my diagnostic tool came up with dtc fault Active- DF 088. Pressure sensor circuit. electronic fault in sensor. How much to repair/ modify?

    Regards Emyr.

    • Hello Emyr

      Thank you for your enquiry,

      We have sent you an email with full details and pricing.

      Kind Regards

      Sophie
      SINSPEED

  • I have a 2008 Citroen 1.6 vtr hdi. The abs pump sensor has failed. What would it cost to repair and what would the time taken be

    • Hello Alfred

      Thank you for your enquiry,

      We have sent you an email with full details and pricing.

      Kind Regards

      Sophie
      SINSPEED

  • Hi!

    i’m carl and i’ve an abs problem with my citroën berlingo 1.6 hdi from 2016. the abs light goes on and i get a beeping noice when running stationary. i read the dTC and i got the code 4040: signal not plausible with brakelight switch. can you guys help me maybe out?

    thanks in advance!

    • Hello Carl

      Thank you for your enquiry,

      We have sent you an email with more details.

      Kindest Regards

      Sophie
      SINSPEED SUPPORT

Leave a Reply

Your email address will not be published. Required fields are marked *