Does your Mitsubishi Colt slip out of gears when driving or fail to even select any gears? Or does it sometimes get stuck in neutral? If so, this may be due to a failed Clutch or Gear Actuator.
The Mitsubishi Colt is equipped with an automated manual gearbox which allows it to interchange between manual or automatic at a flick of a button, which is unlike any normal 5 or 6-speed automatics. It operates on sensors and ECU’s which means it does not require a clutch pedal.
The three main components that consist within this type of gearbox include the clutch actuator assembly, a gear shift actuator assembly and a gearbox ECU. Position sensors are placed within each actuator, which allows for signals to be sent back to the gearbox ECU to determine the position of the clutch as well as what gear the vehicle is in. The gearbox ECU then also uses this information as well as the vehicle’s speed and other parameters to calculate the required gear, when the next gear change should take place and when to engage / dis-engage the clutch.
Unfortunately, as many Mitsubishi Colt owners are most likely aware of – this design has been diagnosed with faults that have caused the vehicle to sometimes be left completely immobile!
Common Clutch + Gear Actuator Problems
The most common signs to look out for when diagnosing a faulty clutch or gear actuator on your Mitsubishi Colt are listed below:
- Slips Out of Gears
- Gets Stuck In Neutral
- Fails to Select Gears
The list above is just some of the common issues that have been diagnosed within our workshop on a daily basis.
Being such a common fault, it is likely you have either a clutch or gear actuator fault and in some cases, it is possible that both actuators have failed together. If you have contacted main dealers already, you will be aware that the price to replace the whole unit can cost in the region of £700 + VAT, which will increase as each actuator will need re-coding to the vehicle. Furthermore, if you opt to replace your unit it will only come with 12 months warranty, and as it is known to be such a common failing part, there is no guarantee that it will not fail again.
My Mitsubishi Colt Actuator is Faulty – How can SINSPEED Help Me?
We specialise in testing and repairing gear + clutch actuators for the Mitsubishi Colt as well as many other vehicles makes and models where electronic actuators control the vehicle’s gearbox. We can fully bench test and repair your Mitsubishi Colt Gear + Clutch actuator using genuine OEM parts are used when repairing the actuators, to ensure that every repaired clutch / gear actuator meets and exceeds OE specifications.
Actuators that are repaired by Sinspeed will not require re-coding when fitting back to your vehicle and for a complete peace of mind – will also come with Lifetime Warranty!
If you have a Mitsubishi Colt with a clutch or gear actuator fault then give us a call today on 0203 815 9441 or alternatively send us a quick message here.

Ajaz is a seasoned automotive electronics engineer with deep expertise in remanufacturing vehicle electronics. He has developed skills in all areas of the automotive field, from rebuilding hydraulic steering components, and mechanical gearboxes and reworking intricate vehicle electronics. Ajaz also acquired Bodyteq, a London-based vehicle bodyshop where he has developed extensive knowledge in automotive refinishing.
Alongside his automotive career, Ajaz has built a career in the IT industry, gaining accredited certification as an AWS Certified Cloud Practitioner, Cloud Architect, and Search Engine Optimisation (SEO) specialist.
I have also fell victim to the dreaded 3/5 second wait before it jerks into gear. 2005 colt did 1.5. Love the car so would like a fix before it goes to the scrappy.
Hi Chris
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
could you please send me pricing
Mitsubishi Colt Clutch / Gear Actuator Repairs regdate is 07 if you need further information please let me know.
many thanks,
Abdi
Hi Abdi
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
Hi I have a 56 plate mitsubishi colt semi automatic, it drives fine in all gears but it’s not engaging going up in to 3rd but when I can get past 3rd and come back down the gears it goes in 3rd perfectly fine and down jump out any help would be great fun on what this problem could be so I could pass on to my garage it’s currently at
Hi Tamara
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
My MITSUBISHI COLT CZ2 DI-D 58 plate In order to get into reverse I have to go to gear 1 then 2 then back down to 1 then it would exchange the reverse gear. Recently would only go into gears 2 and 4 but this seems to have resolved itself. Could you please advise how much it will cost to repair.
Hi Tamim
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
Hi,
A problem with gearbox actuator.
My car is Mitsubishi colt 2009 . It is semi auto.
Firstly , price of fixing this and how many days for ?
Also, my car is under RAC warranty . Is your place for rac?
Thanks.
Hi
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
Hello there,
I have exactly the described problem.
Where are you based?
Hi Nizar
Thanks for the enquiry,
We have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
Hi,
I have been told my clutch actuator needs to be replaced. please could you send me the price through.
many thanks
Hi Paul
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
My car is mitsubishi colt it has a problem with acceleration it takes time before it engages gear one it takes time as if it’s on neutral what might be the cause
Hi Antony
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
I have a colt CZ2 AMT that has locked up with no gear displayed, twice now. I have to use the gearbox in manual and never use auto as it will get the dreaded jump and lurch. How long will it take to get the actuators investigated? It had P1710, P1705, P1830 and U3FFF error codes on the ECU!
Hi Tony
Thanks for the enquiry,
We have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
Hi,
2008 Mitsubishi Colt CZ2 AMT. Periodic issues with reverse gear as it fails to engage and displays ‘O’ on the dash instead of ‘R’. Can you help? If yes, would you please provide details of your costings.
Thank-you.
Hi Adrian
Thanks for the enquiry,
It will need to be thoroughly diagnosed but we can certainly help. If either of the actuators or the transmission control module are at fault, we can remanufacture and return them to you with a lifetime warranty. I have sent you an email with full information and pricing. If you have any questions, please reply to the email and we’ll be happy to assist you.
Kind Regards
Jason
SINSPEED