If you own either a Peugeot 206 or 207, you may have experienced the failure of the infamous Teves MK70 ATE ABS pump, which unfortunately has been known to suffer the same design flaws at the earlier Teves MK60 ATE ABS pump which were known to be complete failures. Both units have internally built pressure sensors with a low maximum pressure rating, and the list below outlines the identical common failures that have been found in both units:

Common Peugeot 206 & 207 Teves MK70 ATE ABS Pump Problems:

• Brake Pressure Sensor (C1301 or C1302)
• No Communication Fault
• ESP / ASR / TCS / DCS (Traction) Light On
• Wheel Speed Sensor Faults
• ABS Light On

Note: The above list consists of the most common faults we have found with these units, but is not a complete list of possible faults.

Sinspeed ABS Repair Service
Here at Sinspeed, if we find flaws in the original design, such as the most common failing internal G201 Brake Pressure Sensor Fault, we will not only look to repair the fault, but we will also modify the unit to ensure that the design fault has been permanently rectified to avoid any further issues regarding the same fault. To give our customers that complete peace of mind, we also offer Lifetime Warranty on all repairs!

Thousands of these units have been repaired in our workshop over the years, so to ensure a faster turnaround, we now also carry these units in stock. All of our exchange units are self-calibrating and will not require any programming.

If you have a faulty Teves MK70 ATE ABS / ESP Pump fitted to your Peugeot 206 or 207 and are looking for a repair or replacement of your damaged ABS unit, then give us a call today on 0203 815 9441.