The Teves MK70 (ATE) ABS unit is fitted to a wide range of modern vehicles and has similar design flaws as the earlier Teves MK60 ATE ABS pump. Both units have internally built pressure sensors with a low maximum pressure rating and have identical common failures as you can see below:

Common Teves MK70 ATE ABS Pump Problems:

• Brake Pressure Sensor (G201)
• ESP / ASR / TCS / DCS (Traction) Light On
• ABS Light On
• No Communication Fault
• Wheel Speed Sensor Faults

Note: The faults listed above are the most common faults we have found with these units but is not a complete list of possible faults.

Our ABS Repair Service
When carrying out the ABS repairs to these ABS pump units we always look for flaws in the original design, such as the common failing internal G201 Brake Pressure Sensor Fault. Not only do we repair the fault, but we modify the unit to ensure that the design fault has been permanently rectified to ensure complete peace of mind that the unit will not fail again in the future. – We give all our customers a Lifetime Warranty.

We have rebuilt thousands of these units over the years and now carry exchange units on the shelf for faster turnaround time. Our exchange units are self-calibrating and will not require any programming. We also offer fitting services at very competitive rates.

This type of ABS Module is fitted to a wide range of vehicles from all makes. Below we have listed the common vehicles we have seen this type of unit fitted to.

Common Vehicles Fitted With This Part: