Description
Alfa Romeo Giulietta ABS Pump Repair
An ABS warning light that stays lit on every journey is the fault Giulietta owners raise most often with this unit. The Giulietta’s ABS pump and module reads the speed of each wheel, adjusts brake pressure when one starts to lock, and supplies the stability and traction systems with the data they need. When it fails, ABS and ESP are normally switched off while the ordinary brakes keep working, so the car should be checked promptly — and a lit ABS light is an MOT fail. We repair your own unit rather than supplying an exchange one.
Common Failures
- ABS light on from the moment the car starts
- ESP and traction control warnings showing with it
- Stored codes relating to brake pressure or wheel-speed signals
- Brake warning light joining the ABS light
- Scan tool unable to communicate with the ABS module
Not Sure It’s the ABS Pump?
A faulty wheel-speed sensor can be the real culprit on a Giulietta, and a weak battery or damaged wiring can bring up the same warnings. If the sensors check out and the light stays on, tell us on the repair form what the dash shows and which codes are stored, and we will say whether the module is the likely cause.
Why Choose Sinspeed?
✅ Lifetime warranty on the repaired unit — no mileage limit attached
✅ Bench tested with simulated wheel-speed and brake-pressure signals
✅ Your own module comes back with its own coding, so reprogramming is not normally needed
Book in your Giulietta’s ABS unit via our repair form.
There are no reviews yet.