Fiat Punto 5 Speed Manual Gearbox Repairs + Free Fitting

Fiat Punto 5 Speed Manual Gearbox Problems
One of the most common failing gearboxes we recondition is found fitted to the Fiat Punto. This common failing 5-Speed Manual Gearbox has many weak points, we see these boxes fail and come in with various problems including: Front Bearing Failure (Lay-Gear / Input shaft), Worn Out Gears and Gear Hubs, Pinion Bearing Failure, Crown Wheel Failure and so on.

We upgrade the components when rebuilding the Fiat Punto gearbox, some of which include an uprated roller bearing and a bolt-on crown wheel. Depending on how the gearbox has failed, you may experience various problems and if a gearbox fault is caught in the early stages, the repairs can be much cheaper.

Common Fiat Punto Gearbox Faults:

• Stuck in Gear
• Jumping Out of Gears
• Crunching Gears (especially 1st, 2nd, 3rd & 4th)
• Gears Not Going In (especially 1st, 2nd, 3rd & 4th)
• Noisy Gearbox (whining / grinding noise)

Note: If the front bearing has failed, you may need to change your clutch due to oil contamination.

Commonly when your gearbox fails, most garages and dealerships will only advise on replacing the unit. A new replacement gearbox can work out to be very expensive and comes with a 12 month limited warranty. Used second-hand parts are a common choice for motorists because they are cheap – but they will also come with a limited 30-90 day warranty and being that these gearboxes are such common failures, you may end up developing a fault with the second gearbox.

Our Fiat Punto Gearbox Repair Service
We are able to fully strip & rebuild the Fiat Punto manual gearbox. When rebuilding the gearbox, we use new genuine OEM components and uprated parts where possible to ensure each and every rebuilt gearbox meets & exceeds OE specifications. All of our reconditioned gearboxes come with a 2 Year unlimited mileage warranty. We also offer free fitting at our gearbox service centre.

If you have a Fiat Punto with a manual gearbox fault, call us today on 0203 815 9441.

Ajaz

Ajaz is a seasoned automotive electronics engineer with deep expertise in remanufacturing vehicle electronics. He has developed skills in all areas of the automotive field, from rebuilding hydraulic steering components, and mechanical gearboxes and reworking intricate vehicle electronics. Ajaz also acquired Bodyteq, a London-based vehicle bodyshop where he has developed extensive knowledge in automotive refinishing.

Alongside his automotive career, Ajaz has built a career in the IT industry, gaining accredited certification as an AWS Certified Cloud Practitioner, Cloud Architect, and Search Engine Optimisation (SEO) specialist.