Mercedes Exhaust Gas Recirculation Valve / EGR Delete Service

Mercedes EGR Faults + Issues
Do you find that your Mercedes is losing power when driving on motorways? Or have you found that it is occasionally misfiring? If so, this could be an indication of a blocked EGR Valve. An EGR valve was incorporated into the vehicle’s exhaust system to allow gasses to be recirculated a second time into the engine, to reduce the emissions in the exhaust gasses before they exit into the atmosphere. Although this helps reduce vehicle emissions, it eventually also causes a decrease in the power output of the engine due to the carbon build-up in the inlet manifold and engine.

Diesel Mercedes are common for their EGR failures, and while there were much easier to bypass on older models, newer models have been programmed to identify when the EGR has been blanked off / bypassed by bringing up fault codes, warning lights and even causing the vehicle to go into “Limp Mode” to restrict the performance of the vehicle.

Common symptoms of a failing Mercedes EGR Valve
The common indicators of a failing or blocked Mercedes EGR valve are highlighted below:

• Missfire
• Loss of Power
• Smoke on Acceleration
• Fluttering On Acceleration
• EGR Flap Position Sensor Faults

If you find any of the above issues with your vehicle, it is more than likely that the EGR valve needs to be either replaced or cleaned. Replacing it can be an expensive option, as when the exhaust gasses are constantly recirculated into the engine, it can still cause the valve to get sticky with carbon build-up. Therefore, if you are looking at replacing your EGR valve as an option, it is recommended that it is cleaned out thoroughly with every other service to ensure that it is maintained.

An alternative option is to have the EGR valve deleted from the engine ECU, by programming it to stay shut at all times. This is done by blanking it off to ensure that it does not recirculate the gasses back into the inlet manifold/engine, hence ensuring that there are no Limp Mode problems as well as any fault codes and warning lights.

Mercedes EGR Delete Service by Sinspeed
Sinspeed offers a completely safe and bespoke EGR Delete service which involves the complete deactivation of the EGR Valve system. We log into your vehicle’s on-board engine management system via the ECU, and from here, we can turn off the EGR valve to ensure that it stays shut at all times. By doing this, the gasses will no longer recirculate into the engine causing any blockages and will eliminate any fault codes or warning lights related to the EGR with no further power loss issues.

You will find a list of the Mercedes we currently offer EGR Delete service for below. If it is not listed, contact us on 0203 815 9441 where we can confirm whether we can offer an EGR Delete for.

Ajaz

Ajaz is a seasoned automotive electronics engineer with deep expertise in remanufacturing vehicle electronics. He has developed skills in all areas of the automotive field, from rebuilding hydraulic steering components, and mechanical gearboxes and reworking intricate vehicle electronics. Ajaz also acquired Bodyteq, a London-based vehicle bodyshop where he has developed extensive knowledge in automotive refinishing.

Alongside his automotive career, Ajaz has built a career in the IT industry, gaining accredited certification as an AWS Certified Cloud Practitioner, Cloud Architect, and Search Engine Optimisation (SEO) specialist.