Citroen C2 & C3 Teves MK70 (ATE) ABS Pump Repair Service

The Teves MK70 (ATE) ABS unit is fitted to the Citroen C2 & C3 models and has been known to suffer with similar design flaws as the earlier Teves MK60 ATE ABS pump which as many unfortunate customers have experienced, were a nightmare. Both units have internally built pressure sensors with a low maximum pressure rating and have identical common failures.

Common Teves MK70 ATE ABS Pump Problems:
There are many problems that have been identified with the Teves MK70 ATE, and below are just a selection of the most common ones we have found when repairing them at our workshop:

• Brake Pressure Sensor
• ESP / ASR / TCS / DCS (Traction) Light On
• ABS Light On
• No Communication Fault
• Wheel Speed Sensor Faults

By investigating the vehicle diagnostics with an appropriate scan tool, the fault code is recorded relating to the wheel speed sensor. If the fault still exists after replacing the offending sensor, then the ABS module would then be scrutinised further. Another fault that could occur is the inability to communicate with the ABS system, and we are also aware that water ingress can cause / contribute to these failures, however, both can be tested thoroughly with our in house testing facilities.

Our ABS Repair Service
When carrying out the ABS repairs to these ABS pump units we always look for flaws in the original design, such as the common failing internal G201 Brake Pressure Sensor Fault. Not only do we repair the fault, but we modify the unit to ensure that the design fault has been permanently rectified to ensure complete peace of mind that the unit will not fail again in the future – We give all our customers a Lifetime Warranty.

We have rebuilt thousands of these units over the years and now carry exchange units on the shelf for faster turnaround time. Our exchange units are self-calibrating and will not require any programming. We also offer fitting services at very competitive rates.

If you have a faulty Citroen Teves MK70 ATE ABS / ESP Pump and are looking for a repair or replacement of your damaged ABS unit then give us a call today on 0203 815 9441.

Ajaz

Ajaz is a seasoned automotive electronics engineer with deep expertise in remanufacturing vehicle electronics. He has developed skills in all areas of the automotive field, from rebuilding hydraulic steering components, and mechanical gearboxes and reworking intricate vehicle electronics. Ajaz also acquired Bodyteq, a London-based vehicle bodyshop where he has developed extensive knowledge in automotive refinishing.

Alongside his automotive career, Ajaz has built a career in the IT industry, gaining accredited certification as an AWS Certified Cloud Practitioner, Cloud Architect, and Search Engine Optimisation (SEO) specialist.