The Teves MK70 (ATE) ABS unit is fitted to the Mazda 2 & 3, and has been known to have similar design flaws as the earlier Teves MK60 ATE ABS pump which as many customers are aware of, turned out to be a complete disaster! Both units have internally built pressure sensors with a low maximum pressure rating and have identical common failures as you can see below:
Common Mazda 2 & 3 Teves MK70 ATE ABS Pump Problems:
- No Communication Fault
- Brake Pressure Sensor (C1288)
- ESP / ASR / TCS / DCS (Traction) Light On
- ABS Light On
- Wheel Speed Sensor Faults
Note: Only the most common faults we have found with these units have been listed above, but is not a complete list of possible faults.
Our ABS Repair Service
Here at Sinspeed, when carrying out the ABS repairs, we always look for flaws in the original design, such as the common failing internal G201 Brake Pressure Sensor Fault. Not only do we repair the fault, but we modify the unit to ensure that the design fault has been permanently rectified to ensure complete peace of mind that the unit will not fail again in the future. We give all our customers a Lifetime Warranty!
We have rebuilt thousands of these units over the years and now carry exchange units on the shelf for faster turnaround time. Our exchange units are self-calibrating and will not require any programming. We also offer fitting services at very competitive rates.
If you have a faulty Teves MK70 ATE ABS / ESP Pump fitted to your Mazda 2 or Mazda 3 looking for a repair or replacement of your damaged ABS unit, then give us a call today on 0844 847 9999.