Mazda 2 & 3 Teves MK70 (ATE) ABS Pump Repair Service
The Teves MK70 (ATE) ABS unit is fitted to the Mazda 2 & 3, and has been known to have similar design flaws as the earlier Teves MK60 ATE ABS pump which as many customers are aware of, turned out to be a complete disaster! Both units have internally built pressure sensors with a low maximum pressure rating and have identical common failures as you can see below:
Common Mazda 2 & 3 Teves MK70 ATE ABS Pump Problems:
- No Communication Fault
- Brake Pressure Sensor (C1288)
- ESP / ASR / TCS / DCS (Traction) Light On
- ABS Light On
- Wheel Speed Sensor Faults
Note: Only the most common faults we have found with these units have been listed above, but is not a complete list of possible faults.
Our ABS Repair Service
Here at Sinspeed, when carrying out the ABS repairs, we always look for flaws in the original design, such as the common failing internal G201 Brake Pressure Sensor Fault. Not only do we repair the fault, but we modify the unit to ensure that the design fault has been permanently rectified to ensure complete peace of mind that the unit will not fail again in the future. We give all our customers a Lifetime Warranty!
We have rebuilt thousands of these units over the years and now carry exchange units on the shelf for faster turnaround time. Our exchange units are self-calibrating and will not require any programming. We also offer fitting services at very competitive rates.
If you have a faulty Teves MK70 ATE ABS / ESP Pump fitted to your Mazda 2 or Mazda 3 looking for a repair or replacement of your damaged ABS unit, then give us a call today on 0203 815 9441.

Ajaz is a seasoned automotive electronics engineer with deep expertise in remanufacturing vehicle electronics. He has developed skills in all areas of the automotive field, from rebuilding hydraulic steering components, and mechanical gearboxes and reworking intricate vehicle electronics. Ajaz also acquired Bodyteq, a London-based vehicle bodyshop where he has developed extensive knowledge in automotive refinishing.
Alongside his automotive career, Ajaz has built a career in the IT industry, gaining accredited certification as an AWS Certified Cloud Practitioner, Cloud Architect, and Search Engine Optimisation (SEO) specialist.
hi im after a price for a repair to a 2009 mazda2 1.5 sport ABS unit
Hi Sam
Thanks for the enquiry,
We’ve sent you an email with full pricing and information.
Kind Regards
Jason
SINSPEED
Hi.
I’ve have a 2010 mazda 3 with a,at the moment intermittent fault. Abs lit and dsc lit. My unit is a BBY7437 AZD
8V61-2C405-AG
K1900
10,0212-0458-4.
is there anything you can do to help
Many thanks. Mel
Hi Mel
Thanks for the enquiry,
We have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
Hi Jason.
I haven’t received a email yet. My email is all lower case.
Cheers
Hi Mel
Thanks for coming back to me,
I have resent the email just now – if you still do not receive it, it may be entering your junk mail box. Alternatively, you can call us on 0203 815 9441.
Kind Regards
Jason
SINSPEED
Hi, could I have a price for 2006 mazda 3 sport 2.0. abs module repair.
Showing code C1288. Thanks.
Hi Pete
Thanks for the enquiry,
We have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
I am in need of a new abs module repair for a 2007 mazda 3 2.3L w/o turbo, has DSC.
Pricing would be great.
Thanks.
Hi Matt
Thanks for the enquiry,
We have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
hi, could you give me a price for repair of a abs pump for mazda 2 1.3 57reg, shwoing code u0415 and for abs sensror, abs light is on all the time, numbers on pump are 06.2102-0468.4.
Many thanks
Hi Sam
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
I have a Mazda 3 ts2 1600 showing the following fault code
===ABS DTC C1288-E0===
Code: C1288 – Pressure Transducer Main/Primary Input Circuit Failure
Status:
– DTC Present at Time of Request
– Malfunction Indicator Lamp is On for this DTC
Module: Antilock braking system
Can you please advise if you can refurbish, Cost and estimated turnaround time.
Regards
John
Hi John
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
Hi,
I have a 2009 Mazda 3 TS2 2 litre automatic petrol car. The ABS and the DSC warning lights light up after a few miles of driving (3-4 miles). Could you please let me know the cost to repair the ABS pump?
Thanks,
Abhi
Hi Abhi
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
Hi,
Nice to meet you. I have a Mazda 3 BL car 2009, I found some problem recently from my car the light of ABS, TCS and break are all turn on. I hv sent my car to the maintanance center to check and the computer read 3 code number – C00200,C0082,C0002. May I know if this is the ABS pump problem? I am actually in Hong Kong. Could you quote the price for me ?
Hi Ben
Thanks for the enquiry,
The fault codes you have provided do indicate a possible ABS pump & module failure. I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
Hello,
Would you please provide me with a quote for supplying replacement ABS unit for Mazda 3 1.6cc (diesel) 2010. Also I would like to know if you can also perform repair and what would be cost in that case?
Thanks,
Wasim
Hi Wasim
Thanks for getting in touch,
We have sent you an email with full details and pricing.
Kind Regards
Sophie
SINSPEED
Hey I’ve got the error code c0020 Mazda 3 BL. Can I have an estimate please?
Hi Daniel
Thanks for getting in touch,
We have sent you an email with full details and pricing.
Kind Regards
Sophie
SINSPEED