04 Nov, 10

Mazda 6 DPF Removal (DPF-OFF) Breakthrough!!

Mazda 6 DPF (Diesel Particulate Filter) Removal (DPF-OFF) BreakthroughMazda 6 DPF Removal
We launched our long awaited Mazda 6 DPF (Diesel Particulate Filter) Removal (a complete Mazda 6 DPF-OFF) system breakthrough in 2010 and to present (2014) we have removed over 1500 Mazda 6 DPF’s with a 100% success rate.

From 2007-2010 we were turning customers away on a daily basis as there was simply no options for customers with Mazda 6 DPF Problems. It’s a very common problem, not only on Mazda’s but all modern diesel vehicles which are equipped with a Diesel Particulate Filter.

For more information on DPF’s (Diesel Particulate Filters), how they work and our services.. check out our in-depth article on Diesel Particulate Filters (DPF) Problems & DPF Removal Procedures.

We’ve been successful in the removal of DPF filters for all other vehicles since 2007, however, with the Mazda 6 the problem was that there was no way of accessing the ECU data chip directly through the OBD port and not much luck chip-tuning via a BDM tool on a bench either. The Mazda 6 (both RF7K & RF8G / RF8X) are fitted with a Denso engine ECU unit and is heavily encrypted. The Mazda 6 DPF itself is relatively easy to remove as it sits in the middle section of the exhaust just below the downpipe – but physically removing the Mazda 6 DPF was never the problem, it was always the encryption of the ECU which restricted us and every other tuning company in the world.

In fact, there is to our knowledge, no other company currently in the UK who can offer a complete DPF removal service for the Mazda 6 without trying to “trick” the ECU. There are companies now popping up everywhere offering Mazda 6 DPF Removal services, claiming to “de-activate” the Mazda 6 DPF system but in actual fact all they are really doing is fitting a little box to your vehicle to “trick” the ECU into thinking the DPF is okay and then removing the filter from the exhaust. The problem is, the system is still active and will continue to regenerate – the result is excessive smoke and poor fuel economy.

Due to popular demand, our electronic engineers & highly qualified technicians have been working day & night on a fix for this problem since 2007 and finally in 2010, we came up with a real permanent solution for the Mazda 6 DPF problems.

We can confidently offer a complete Mazda 6 DPF Removal Service whereby we turn off the DPF settings from the ECU, completely de-activating the DPF system and successfully removing the DPF (Diesel Particulate Filter) from the exhaust system with zero errors – That’s right, your vehicle will NOT fall in to LIMP HOME MODE and you will NOT suffer any error messages or regeneration processes ever again!

That’s not all – we go one step further to offer an exclusive Smoke-Correction service for all our customers to ensure 100% satisfaction guaranteed. We have patented in-house technology that allows us to carry out smoke-correction services to ensure that after having your Mazda 6 DPF Removed by Sinspeed, your vehicle will not smoke – Guaranteed!

We launched the release of this service in October 2010 and since then, we have successfully carried out Mazda 6 DPF removals on 23 cars in just one month with no problems at all and in total now over 1500 Mazda 6 DPF Removals with a 100% success rate.

Benefits of our Mazda 6 DPF Removal Service

  • Increased Performance
  • Sharper Throttle Response
  • Better Fuel Economy
  • No More DPF Faults
  • No More Regenerations
  • Lifetime Warranty
  • Guaranteed MOT Pass

Removing your Mazda 6 DPF will not cause you to fail an MOT, we can guarantee this with our Smoke-Correction service. Removing your Mazda 6 DPF will not bring up any error messages and the car will not go into LIMP mode. Also, you will never experience any Regeneration messages where the ECU normally attempts to clean the DPF – this is because the DPF is no longer existing.

Finally, you will experience an overall increase in performance, smoothing out any flat spots and safeguard the life of both your engine & turbocharger.

A new Mazda 6 DPF (Diesel Particulate Filter) will range from £1500.00 – £2500.00 (+Labour & +VAT). We can remove the entire Mazda 6 DPF  + program the ECU to de-activate the Mazda 6 DPF system for a fraction of this cost and you’ll never have to worry about it ever again. All our work is warranted for the life of the vehicle (Lifetime warranty) and every Mazda 6 DPF Removal we carry out will receive our Smoke-Correction service at no additional cost.

For more information, please call us on 0203 815 9441.

Tags : help with Mazda 6 dpf problems, how to remove Mazda 6 dpf, Mazda 6 de-dpf, Mazda 6 dpf failure help, Mazda 6 dpf fix, Mazda 6 dpf fixed, Mazda 6 dpf help, Mazda 6 dpf off, Mazda 6 dpf problems, Mazda 6 dpf regen, Mazda 6 dpf regeneration, Mazda 6 dpf removal mot, Mazda 6 dpf removal procedure, Mazda 6 dpf removal remap, Mazda 6 dpf removal session, Mazda 6 dpf removal solution, Mazda 6 dpf solution, Mazda 6 dpf solutions, Mazda 6 P242F Fault Code Fixed By Sinspeed, mazda dpf, mazda dpf problems, mazda dpf removals, mazda dpf repairs, mazda dpfs, P242F DPF Failure - Best Solution From Sinspeed, P242F Fault Code Solution For Mazda By sinspeed, removing Mazda 6 dpf, removing mazda dpf, replacement dpf for Mazda 6.
88 thoughts on “Mazda 6 DPF Removal (DPF-OFF) Breakthrough!!
  • Do you have an outlet in Milton Keynes Buckinghamshire and what would be the cost for a Mazda 6 please .

    Kind regards

    Barry

    • Hi Barry

      Thanks for the enquiry,

      We do have an agent in Milton Keynes and can offer a few options for the Mazda 6 DPF Removal. I have sent you an email with full information and pricing for the various options. If you have any questions, please reply to the email and we’ll be happy to assist you.

      Kind Regards

      Jason
      SINSPEED

  • Hi can you send me pricing for Dpf removal from my 13 plate mazda 6, the car is in Romsey hampshire

    • Hi Geoff

      Thanks for the enquiry,

      We have sent you an email with full information and pricing for the Mazda DPF Removal services available in Romsey, Hampshire.

      Kind Regards

      Jason
      SINSPEED

  • Hiya

    Wondering how much for my nightmare dpf failing mazda 6 sport 2008?
    Also where abouts are you located?
    Many thanks
    James

    • Hi James

      Thanks for the enquiry,

      We have sent you an email, please respond with your postal code for a customised quotation, which will include details of your local dealer.

      Kind Regards

      Jason
      SINSPEED

  • Have a 59 reg Mazda 6 estate how long does it take to do the delete and how much and what warranty is given

    • Hi Martin

      Thanks for getting in touch,

      We have sent you an email requesting more information.

      Kind Regards

      Sophie
      SINSPEED

  • Hey I have a .mazda 6 2008 and having loads of problems with my DPF how much do you charge for an removal please… linconshire

    • Hi Arron

      Thanks for getting in touch,

      We have sent you an email with full details and pricing.

      Kind Regards

      Sophie
      SINSPEED

  • How much would you do dpf removal for mazda 6 2010 model 2.2L engine. i need a fantastic work and final solution…

    • Hello Sean

      Thanks for getting in touch,

      We have sent you an email full details and pricing.

      Kind Regards

      Sophie
      SINSPEED

  • Hi,
    I have a Mazda 6 2011 2.2 diesel with the engin check light ON fix and flectring DPF light, could you please send me a qoute to remove the DPF and probbly to remap the ECG? what’s the nearest garage to NN4 8 AY.
    Thank you in advence.
    Morsli

    • Hi Morsli

      Thank you for your enquiry,

      We have sent you an email with more details.

      Kind Regards

      Sophie
      SINSPEED

    • Hello Sean

      Thanks for getting in touch,

      We have sent you an email with full details and pricing.

      Kind Regards

      Sophie
      SINSPEED

  • Hello.
    I have a mazda 6 2.oltr ts2
    It’s got another dpf problem after 2 forced regens . I was wondering how much it would cost to remove it and sort the ecu out.

    It’s already got a custom stage 1 map on it and is running 180-410nm if you can use this map again would be grate.
    I love in Peterborough, what would be closest depo to me.

    Thank you
    Kv

    • Hello Kingsley

      Thanks for your enquiry,

      We have sent you an email with full details and pricing.

      Kind Regards

      Sophie
      SINSPEED

  • Hi, i have a 2011 mazda 6 2.2 sport with stage 1 map. I’m looking to get complete dpf removal but keep the map as its currently running 210-215bhp. Is this possible? If so can i please have a quote?

    • Hi Ash

      Thanks for getting in touch,

      We have sent you an email with full details and pricing.

      Kind regards

      Sophie
      SINSPEED

Leave a Reply

Your email address will not be published. Required fields are marked *