A modern semi-automatic Peugeot / Citroen will come with SensoDrive technology. Sensodrive is basically an electronically controlled manual gearbox. It will come fitted with an electronic clutch actuator, gearbox actuator and a gearbox ECU.
The Peugeot / Citroen range vehicles with SensoDrive technology often suffer transmission faults and most commonly the problems are within the electronic clutch actuator and / or gearbox actuator. Below we’ve listed some of the common failing symptoms we’ve seen these units suffer with.
Common Clutch Actuator / Gearbox Actuator Problems
- Won’t Rev in Reverse
- Gears Won’t Select
- Selecting Wrong Gears
- Going in & out of Auto Mode
- Showing ” – ” Sign Instead of Gears
- Showing Snowflake Sign on Dash
- ECU Logging Clutch Actuator Faults
- ECU Logging Gear Actuator Faults
A new clutch actuator alone will cost you £480 +Labour and may require coding / calibration. A new gearbox actuator alone will cost you £780 +Labour and may require coding / calibration. New replacement parts from dealers will come with a 12-month warranty. Second hand used parts will be a lot cheaper but come with limited warranty (typically 30-90 days) and may require reprogramming.
Our Clutch / Gearbox Actuator Repairs
We offer a fast, efficient and affordable repair solution. We are able to fully test & repair the clutch and gearbox actuators for the Peugeot / Citroen sensodrive vehicles. When rebuilding the actuator units we use new genuine OEM components to ensure that each and every actuator rebuild meets & exceeds OE specifications and because we will be repairing your own unit, it will not require any programming. All of our clutch and gearbox actuator repairs come with a Lifetime warranty.
We also offer a professional fitting service if required.
If you have a semi-automatic (sensodrive) Peugeot or Citroen and are having transmission problems pointing towards a clutch actuator or gearbox actuator fault then give us a call today on 0203 815 9441.
Ajaz is a seasoned automotive electronics engineer with deep expertise in remanufacturing vehicle electronics. He has developed skills in all areas of the automotive field, from rebuilding hydraulic steering components, and mechanical gearboxes and reworking intricate vehicle electronics. Ajaz also acquired Bodyteq, a London-based vehicle bodyshop where he has developed extensive knowledge in automotive refinishing.
Alongside his automotive career, Ajaz has built a career in the IT industry, gaining accredited certification as an AWS Certified Cloud Practitioner, Cloud Architect, and Search Engine Optimisation (SEO) specialist.
Hi how much to recon a citroen c4 exclusive hdi 1.6 .gearbox actuator.
Hi Mohamed
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
Hi have a peugeot 3008 semi auto with fault codes p162b and p1755 is this to Do with the gearbox Actuators. Many thanks
Hi Lee
Thanks for the enquiry,
These faults can be caused by the clutch/gear actuators but also the clutch assembly itself. It will need to be thoroughly diagnosed to confirm the root cause of the issue. We do remanufacture the clutch + gear actuators and we test all units first to confirm the faults before proceeding with a repair.
I have sent you an email with full information and pricing. If you have any questions, please reply to the email and we’ll be happy to assist you.
Kind Regards
Jason
SINSPEED
I have Peugeot partner tepee on 63 plate. I have replace actuator and pump so I have got the old one comes needs to do Reconditioned them so please give me price and how much warranty
here are some nos 9678905780
Hi Nadeem
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
How much is a peugeot 1007 sonsordrive piloted gearbox clutch actuator
Hi Laxwell
Thanks for the enquiry,
I have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
Have c4 Picasso VTR+ 2.0ltr hdi, jumped out of gear into nuetral, called AA they found some code faults, (Gear control – 01K / Direct shift trans.MCP 5.0 Status :P1731 – Gear actuator. Error Message :). Had know problem since they reset CPU. Could this be start of problems, had car two & half yrs. New clutch & gearbox reconditioned 12m mnths ago
Hi Alan
Thanks for the enquiry,
The P1731 is a very common code associated to the malfunction of the gear actuator and it may have just been a glitch but more than likely, I would say it is possibly the beginning of this unit failing and over time the problems may become more frequent. If you experience any more issues with either the clutch or gear actuators, I would recommend having them sent in to be tested for peace of mind.
I have sent you an email with full information and pricing for our test and repair services. If you have any other questions, please feel free to come back to me.
Kind Regards
Jason
SINSPEED
Hi how much to recon a citroen c4 grand picasso hdi 1.6 .gearbox actuator
Hi John
Thanks for the enquiry,
We have sent you an email with full information and pricing.
Kind Regards
Jason
SINSPEED
Hi, I have a Peugeot 1007 1.6 gasoline with sensodrive. What would the price be for this thing?
Hi Krasimir
Thanks for the enquiry,
We have sent you an email with full information and pricing for our services on these parts.
Kind Regards
Jason
SINSPEED
Hi,
We have a 2009 bipper teepee that is giving trouble starting it is a semi auto but if you disturb the wires by means of reach over gearbox and wiggle the loom around the selector this allows it to start.
Could this be an actuator fault?
Thanks in advance.
Nigel.
Hi Nigel
Thanks for the enquiry,
We have sent you an email with full information and pricing regarding the clutch + gear actuators on your 2009 Bipper Teepee.
Kind Regards
Jason
SINSPEED
Hi I have a gear change actuator for my C2 furio can you give me a price for testing /repair also will I be able to refit it without any diagnostic equipment thanks
Hi Peter
Thanks for the enquiry,
We have sent you an email with full information and pricing for the testing and repair of the gear actuator to your Citroen C2. When you refit the unit after a successful repair, coding is not required as you would with a new unit, however, you may sometimes need access to diagnostic equipment to reset learned values and clear any fault codes.
I hope this information helps and should you have any further questions, feel free to respond to the email and we’ll be happy to assist you.
Kind Regards
Jason
SINSPEED
c2 vtr sensor drive goes into first and second but that’s it no more gears how much to supply and fit clutch and gearbox actuator and where are you based thanks Ray
Hello Ray
Thanks for getting in touch,
We have emailed you with full details and pricing in regards to your query.
Kind Regards
Sophie
SINSPEED